EIS TechInfra Solutions
Monitor Lift for Conference Rooms and Classrooms
Monitor Lift
Monitor Lift
Categories: Monitor Lift
EIS TechInfra Solutions distributes the Ultraslim Monitor Lift, a motorized monitor lift that raises a touch-enabled screen flush out of a table and lowers it back down when not in use. Built under the EIS TOUCH line, available in five screen sizes, with a two-year warranty.
KEY FEATURES
• Brushed aluminum top plate in silver or black; aluminum bottom box
• RF wireless remote plus a dedicated power button on the top plate
• One remote controls every lift in the room, up to 30 metres
• Automatic power on/off in sync with the lift
• Separate USB port with plastic cover, for charging or external devices
• 15° standard backward tilt, optional tilt up to 60°
• Hand-clamp safety design on the closing mechanism
• RS485/232 protocol, compatible with AMX, Crestron, and Creator systems
• Capacitive touch screen available on the ET-SLIM ML-XT model
SPECIFICATIONS
Feature
Specification
ET-SLIM ML-X vs ET-SLIM ML-XT
WHERE IT FITS
• Classrooms sharing one teaching station across periods
• Control rooms and reception desks needing a display on demand
• Rooms already running AMX, Crestron, or Creator automation
SUPPORT
Frequently Asked Questions
What is a motorized monitor lift?
A motorised monitor lift is a mechanism that raises a display out of a table or cabinet on demand and retracts it flush when not needed, keeping the surface clear between meetings instead of holding a fixed screen.
How does the EIS Ultraslim Monitor Lift raise and lower the screen?
The EIS Ultraslim Monitor Lift sits inside a table cutout and uses an internal motor to raise or lower the screen through the top plate power button, an RF remote, or a connected AMX, Crestron, or Creator control system.
What screen sizes does the EIS monitor lift come in?
EIS TechInfra offers the Ultraslim Monitor Lift in five screen sizes: 15.6, 17.3, 18.4, 21.5, and 23.6 inches, all sharing the same 1920 x 1080 resolution, 16:9 format, and HDMI/VGA signal input.
What is the difference between the ET-SLIM ML-X and ET-SLIM ML-XT models?
The ET-SLIM ML-XT includes a capacitive touch screen, while the ET-SLIM ML-X uses a standard non-touch display. Both variants share the same aluminum housing, 78mm depth, two-year warranty, and control system compatibility.
Can one remote control more than one EIS monitor lift?
Yes. The EIS RF remote can operate every monitor lift installed in the same room, within a 30-metre range, so a single remote covers multiple units in a training room or auditorium without extra hardware.
What control systems work with the EIS monitor lift?
The EIS monitor lift communicates over RS485/232 and integrates with AMX, Crestron, Creator, and similar automation platforms, so an integrator can add it to a room that already runs on centralized control.
How thick is the EIS monitor lift once installed?
The lift housing has a total depth of 78mm, with a top plate measuring 1.8mm thick, giving the unit a low profile that sits close to the table surface once the screen is lowered.
Does the EIS monitor lift turn the screen on and off automatically?
Yes. The screen turns on and off automatically as part of the lift’s power sequence, in addition to the dedicated power button built into the top plate for manual control.
What viewing angle does the EIS monitor lift support?
The EIS Ultraslim Monitor Lift tilts back 15 degrees as the standard viewing angle for comfortable use, with an optional configuration available that extends the backward tilt up to 60 degrees.
What warranty comes with the EIS monitor lift?
The EIS Ultraslim Monitor Lift ships with a two-year warranty covering the lift mechanism and screen, backed by on-site installation and AMC support from the EIS TechInfra team in Bangalore.